IOIO Bootloader Update

Well, I made some progress this weekend with respect to hardware, firmware, and bootloaders. My bluetooth IOIO implementation is still giving Eclipse shit-fits. I am seeing an error with the bluetooth library…it fails on compilation. Unfortunitely, I am running out of weekend, so will cut this one short and make a statement about the backend.

In order to replace that pesky USB cord with a sleek virtual cord, aka a bluetooth connection, one must update not only the IOIO application, but also the IOIO bootloader. The application is easy enough to flash, but he bootloader requires a programmer for updating. Luckily, Ytai was kind enough to design a ‘programmer by second board’ option, and incorporate that into the same UI as he utilized for flashing apps to the board. The first step was off to SparkFun for a second IOIO.

ioio android bootloader

clamptastic

I kept the second bare bones, except for the pins I would need to do the actual programming.

soldering stuff

ugly but functional

The key was to have both boards up to date enough to function as programmer and target, so I first loaded the newest application versions to each board. The rest was a matter of utilizing the IOIO Manager app on the Android, and letting the programmer do its thing.

two ioios

ginger ale? no.

For reference, the setup was power to power, ground to ground, pins 37|38 to pins 37|38, and pin 36 to mclr…with mclr being on the target board. USB connected to the programmer board…that is that.

Unfortunately, my IOIOSeek app ended up stroking out when I attempted to load the bluetooth library. It works fine with the newest general library version, so I know that my bootloader indeed was a success. Back to the Java drawing board before I can demonstrate the new feature.

Comments are closed.