DIY Copper End Table

At some point, I volunteered to make us some end tables for the house. It turns out that I really don’t like end tables…everything I came across was either way to big or too flimsy to take any kid abuse. The main level in our house is basically wide open, so keeping foot traffic lanes open is key. Long story short, I ended up in the copper area of Lowes and came up with a solution…

diy

Maybe this is brilliant, or maybe my brain automatically looks for reasons to use my torch and Dremel. Probably the later.

copper_assembly

Emma was willing to help with the stress test, but unwilling to put down the GBA…

copper_stress_test

End result:

copper_table

This actually turned out fairly decent, especially considering the fact I did all of the woodworking on that chunk of poplar with a Dremel Multi-Max. My soldering skills are more tuned to electronics, so I burned the shit out of the bulkier joints due to lack of flux. Adds character, I guess.

I have another stick of 3/4″ copper, so plan on doing round two as a winter project. I keep thinking that some sort of electrolysis setup would be awesome for the copper cleaning phase, which could be a project in itself. This project would be a lot more intense with a car battery and a whole bunch of wire.

Encabulating Photon Emission Interface

My small lab assistant and I tossed our hats in the ring and were invited to compete in the 2013 Red Bull Creation competition. In short, it was great. Team swan tron didn’t make it to the finals, (this year, suckers) but had a great time and learned a ton. Dual hats off to the six teams heading to NY for the last phase…you all earned it.

Team swan tron entered for consideration an Encabulating Photon Emission Interface.

team swan tron

team swan tron

Red Bull’s concept was simple and brilliant…the accepted applicants were given custom Arduino shields, a whole bunch of LEDs, and a path to a git repo containing a library with which to make them crank. That, about four weeks, and a nudge to do something awesome with lights. We did this…

We used all of the PWM channels at our disposal to handle the colors on our Encabulating Interface, and tossed in some analog stuff for good measure. Our software utilized the Encabulator’s accelerometer values as the interface’s interfacing variables, which is nice. Most of the board’s function was exercised, as was my brain, Emma’s brain, and Emma in general. She liked the feedback in a belly laugh way…so that is that. Pretty sure she and I both came out ahead on this effort.

Here’s to 2014…look out for team swan tron.